SHIPPING DATA OF IIC SERVICE MODE
(apply only when the memory IC, I002, change.)
1. Select the adjustment item, 323(Initialization of memory IC, I002) by pressing the or cursor button on
Remote control handset.
2. Set data of adjustment item, 323 to "01" by pressing the or cursor button on Remote control handset.
3. Press the RECALL button on Remote control handset to memorize the data.
The data of adjustment item, 323 is changed to "00" after all memory IC's data are initialised.
4. Press AC power switch to turn off the TV set.
5. Press AC power switch to turn on the TV set.
Result : The memory IC, I002 is initiallized.
6. After initialization, set the shipping data as show in Table 2.
7. Go to previous page and adjust the IIC data in Table 1
- 15 -
To Next Page
Loading...
Need help?
General