Table A-4 Functions which LPAR manager supports
Item Support (version)
SMP
configuration
13
2-blade SMP Y (01-8X or later)
4-blade SMP
14
Y (01-9X or later)
Max LPAR No. Max LPAR No. which can be defined 30 (01-0X or later)
60 (02-0X or later)
Max LPAR No. which can be Activated. Essential: 4 (01-0X or later)
Advanced: 30 (01-0X or
later)
Enterprise: 60 (02-27 or
later)
processor Minimum division unit Thread (01-0X or later)
Max logical
Processor No.
CB 520H A1/B1/
B2
32 (01-0X or later)
CB 520H B3 64 (02-05 or later)
72 (02-50 or later)
CB 520H B4 88 (02-50 or later)
CB 520A A1 32 (01-1X or later)
CB 540A A1/B1 32 (01-2X or later)
CB 520X B1/B2/
B3
32 (01-8X or later)
64 (01-9X or later)
72 (02-28 or later)
240 (Only Dedicated mode,
and 02-40 or later)
Dedicated
Processor
Physical Processor
No.Specifier
Y (01-0X or later)
Shared Processor Physical Processor
No.Specifier
Y (01-0X or later)
Service rate Y (01-0X or later)
Idle Detection Y (01-0X or later)
Processor capping Y (01-0X or later)
The Max group No. which can be
defined
Essential: 4 (01-0X or later)
Advanced: 30 (01-0X or
later)
Enterprise: 60 (02-27 or
later)
Hyper Thread Y (01-0X or later)
Scheduling Mode dynamic change Y (01-0X or later)
Partition Reference Time
Enlightenment (PRTE)
Y (02-25 or later)
A-10
Setting Item Catalogue
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
