49
SETUP menu
Item Description
PERFECT FIT
This item allows you to adjust the shape of the projected image in
each of the corners and sides.
(1) Choose a corner or side to adjust
using the ▲/▼/◄/► buttons and press
the ENTER or INPUT button.
(2) Adjust the distortion as below. Use
the ▲/▼/◄/► buttons to adjust the
position of the corner. Use the ▲/▼
buttons to adjust the distortion of the
top or bottom side, after dening the
adjusting position with the ◄/► buttons.
Use the ◄/► buttons to adjust the distortion of the left or right side,
after dening the adjusting position with the ▲/▼ buttons.
(3) To adjust another corner or side, follow the same procedure
from (1) above. To reset the adjustment of all the corners and sides,
select RESET with the ▲/▼/◄/► buttons and press the ENTER or
INPUT button.
(4) This projector is equipped with a memory feature for PERFECT
FIT adjustment. Up to 3 sets of adjustments can be stored.
• SAVE:
To store the current PERFECT FIT adjustment, select one of the
SAVE icons
numbered 1 to 3 (number of the memory) with the
◄ /▲/▼ buttons and press the ENTER or INPUT button.
Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
• LOAD:
To recall stored adjustments, select one of the LOAD icons
numbered 1 to 3 (number of the memory) with the ◄ /▲/▼ buttons
and press the ENTER or INPUT button.
Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
- The LOAD functions whose linked memory has no data are
skipped.
- There may be some noise and the screen may icker for a
moment when loading data. This is not malfunction.
(continued on next page)
To Next Page
Loading...
