92
Presentation tools
USB Display(Mac computer)
The projector can display images transferred from a computer via an USB cable (11).
• The image transmission from the computer is suspended while the
password-protected screen saver is running. To resume the transmission, exit
the screen saver.
•
If "Waiting for connection." remains displayed while the USB cable is connected,
remove the USB cable and reconnect after a while.
• Check our web site for the latest version of the software and its manual.
(User's Manual (concise))
Follow the instructions that can be obtained at the site for updating.
NOTE
Hardware and software requirement for computer
• OS: Mac OSX 10.5(Intel)
Mac OSX 10.6(Intel)
Mac OSX 10.7(Intel)
This application is not compatible with Power PC.
• Graphic card: 16 bit, XGA or higher
• Memory: 512 MB or higher
• Hard disk space: 30 MB or higher
Starting USB Display
(continued on next page)
When you connect your computer to the USB TYPE B port on the projector
using a USB cable, the projector will be
recognized as a CD-ROM drive on your
computer. Double click the CD-ROM, then
double click
"LiveViewerLiteForUSB_MacOS.app.".
The application, “LiveViewer Lite for USB”,
will close automatically when the USB cable is unplugged. However, it may remain
displayed at times.
To Next Page
Loading...
