35
Description of each menu
Function Description
Wall Color
In the situation where you are projecting onto a colored surface such as
a painted wall which may not be white, the Wall Color feature can
help correct the projected picture' colors to prevent possible color
difference between the source and projected pictures.
Use the / buttons to select a color which is closest to the color of
the projection surface.
This function is only available when a computer signal (analog
RGB) is selected.
Aspect Ratio
There are three options to set the image's aspect ratio depending on
your input signal source. See "Selecting the aspect ratio" on page 24 for
details.
Keystone
Corrects any keystoning of the image. See "Correcting keystone" on
page 23 for details.
Position
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach their
maximum or minimum.
This function is only available when a computer signal (analog
RGB) is selected.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when a
computer signal (analog RGB) is selected.
H. Size
Adjusts the horizontal width of the image.
Magnify
Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 23 for details.
To Next Page
Loading...
