37
Function Description
Preset Mode
Pre-defined preset modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
preset mode" on page 26 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 26 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 27 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 27 for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 27 for details.
The function is only available when a Video or S-Video signal
with NTSC system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 27 for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Brilliant Color
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 27 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 27 for details.
3D Color
Management
See "Color Management" on page 28 for details.
Quick Auto
Search
See "Switching input signal" on page 21 for details.
Auto
Adjustment
See "Auto-adjusting the image" on page 22 for details.
To Next Page
Loading...
