PICTURE 1 Menu
PICTURE 2 Menu
With the PICTURE 1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
With the PICTURE 2 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
Item Description
COLOR BAL R
Adjust Red Color Balance: Dark ⇔ Light
COLOR BAL B
Adjust Blue Color Balance: Dark ⇔ Light
SHARPNESS
Adjust Sharpness (for VIDEO/S-VIDEO): Clear ⇔ Soft
COLOR
Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):
Dark ⇔ Light
TINT
Adjust Tint (for VIDEO/S-VIDEO): Green ⇔ Red
PICTURE1 Menu
Item Description
V POSITION
Adjust Vertical Position (for RGB): Up ⇔ Down
H POSITION
Adjust Horizontal Position (for RGB): Left ⇔ Right
H PHASE
Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):
Right ⇔ Left
• Adjust to eliminate flicker.
H SIZE
Adjust Horizontal Size (for RGB): Large ⇔ Small
• If the horizontal size adjustment is excessive, the image may not be displayed
correctly. In such a case, initialize H SIZE with the RESET button.
OVER SCAN
Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):
LARGE ⇔ MIDDLE ⇔ SMALL
• It is recommended to select SMALL to avoid flicker at the lower part of the
picture.
3
PICTURE2 Menu
Example : PICTURE1 Menu
(COLOR BAL R)
Example : PICTURE2 Menu
(V POSITION)
To Next Page
Loading...
