To Next PageTo Next PageWhat to do if Hitachi CP-SX12000 lamp does not light?
If the lamp does not light on your Hitachi Projector and there's a possibility that the interior is heated, turn the power off and allow the projector to cool down for at least 20 minutes. After it has cooled, check for any blockage of the air passage, a dirty air filter, or a peripheral temperature exceeding 35°C. If the issue persists, the lamp may need to be changed.
How to fix dark picture on Hitachi Projector?
To fix dark pictures on your Hitachi Projector, adjust the BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function.
How to fix blurry picture on Hitachi Projector?
If your Hitachi Projector displays blurry pictures, adjust the focus using the FOCUS button, and/or adjust H PHASE using the menu function.
What to do if my Hitachi CP-SX12000 displays no picture?
If your Hitachi Projector displays no picture, ensure the connection cables are correctly connected.
What to do if Hitachi CP-SX12000 temperature is rising too much?
If the internal temperature of your Hitachi Projector is rising too much, turn it off immediately and let it cool down for at least 20 minutes. After cooling, check for any ventilation obstructions around the projector and ensure the ambient temperature does not exceed specified limits. If the issue persists after removing obstacles, the filter unit may need replacement.
Why is button operation unavailable on Hitachi CP-SX12000 Projector?
If button operation is not available on your Hitachi Projector, wait for the LENS SHIFT indicator to stop blinking, or check the settings of the input ports, especially if they are set to "SKIP". This can occur while the lens is moving or if all input ports are set to skip.
How to turn off blank screen on Hitachi CP-SX12000 Projector?
If your Hitachi Projector displays a BLANK screen, press the BLANK button on the remote control.
Why are pictures trembling on my Hitachi Projector?
If pictures are trembling on your Hitachi Projector, it's possible that the exhaust ventilation holes at the front are blocked. Remove any objects from the front side of the projector.
What to do if Hitachi Projector cooling fan is not operating?
If the cooling fan is not operating on your Hitachi Projector, turn the power off and let the projector cool down for at least 20 minutes. After cooling, confirm that no foreign matter has become caught in the fan before turning the power back on.
How to disable ECO mode on Hitachi Projector?
If your Hitachi Projector's ECO MODE function is active, select NORMAL for the ECO MODE item in the SETUP menu.
General
