EasyManuals Logo

Hitachi CP-WU9411 User Manual

Hitachi CP-WU9411
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
10
• When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufciently cooled down, please make
conrmation of the attachment state of the lamp and lamp cover, and then turn
the power on again.
NOTE
For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY
menu (
User's Manual - Operating guide).
For the SHUTTER indicator, see the section "Temporarily shading the screen"
(
User's Manual - Operating guide).
The FILTER indicator shows the condition of the air lter. Utilize this feature to
keep the interior of the projector in good condition.
FILTER indicator Description
Turned off
The air lter is clean.
No need to clean up.
Lighting In Orange
The air lter is going to be choked.
It is recommended to clean it. In addition, please see the
section "There is a possibility that the interior portion has
become heated" (
User's Manual - Operating guide
).
Lighting In Red
The air lter is choked.
It is required to turn the power off and clean the air lter
immediately. In addition, please see the section "There is a
possibility that the interior portion has become heated"
(
User's Manual - Operating guide
).
Regarding the indicator lamps (continued)
Resetting all settings
When it is hard to correct some wrong settings, the FACTORY RESET function of
SERVICE item in OPTION menu (User's Manual - Operating guide) can reset all
settings (except settings such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER
MESSAGE, STANDBY MODE, COMMUNICATION, SECURITY and NETWORK) to
the factory default.
• The FILTER indicator might light up in orange or red when something
blocks the intake vents even though the air lter is clean.
The FILTER indicator might light up differently from other indicators or display
messages related to cleaning the air lter. Follow the prompt that is displayed
earlier.
NOTE
Troubleshooting

Other manuals for Hitachi CP-WU9411

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-WU9411 and is the answer not in the manual?

Hitachi CP-WU9411 Specifications

General IconGeneral
BrandHitachi
ModelCP-WU9411
CategoryProjector
LanguageEnglish

Related product manuals