Do you have a question about the Hitachi CP-WU8461 and is the answer not in the manual?
Resolution | WUXGA (1920 x 1200) |
---|---|
Keystone Correction | Vertical: ±30°, Horizontal: ±30° |
HDBaseT | Yes |
Projection System | 3LCD |
Light Source | Laser |
Lens Shift | Vertical: ±60%, Horizontal: ±30% |
Connectivity | HDMI, VGA, USB, LAN, RS-232C |
Zoom Ratio | 1.6:1 |
Screen Size | 30 - 300 inches |
Brightness | 6000 ANSI Lumens (Normal Mode), 4800 ANSI Lumens (Eco Mode) |
Lamp Life | 20, 000 hours (Normal Mode), 50, 000 hours (Long Life 2 Mode) |
Throw Ratio | 1.2 - 2.0:1 |
Projection Distance | 1.2 - 15 m |
Noise Level | 35 dB (Normal Mode), 27 dB (Eco Mode) |
Details hardware and software prerequisites for network connectivity, including OS, CPU, memory, and browser.
Provides a fast method for network setup using the LiveViewer application for simple projector connection.
Step-by-step guide for manually setting up wired network connections using a LAN cable.
Step-by-step guide for manually setting up wireless network connections using a USB wireless adapter.
Explains how to access and use the web interface for projector management and configuration.
Details the use of Crestron e-Control for projector operation and management via a web browser.
Describes how to physically connect the projector, computer, and external devices for network bridge operation.
Explains the configuration settings for network bridge communication using communication and serial settings.
Identifies the specific ports used for network bridge communication via the web browser.
Details the HALF-DUPLEX and FULL-DUPLEX transmission methods for network bridge communication.
Configures the projector to automatically send alert messages via email for maintenance or error conditions.
Explains how to manage projector information and status from a computer using the SNMP protocol.
Allows setting up scheduled events for the projector, such as power on/off and input switching.
Describes how to configure and control the projector using RS-232C commands over the network.
Information on Crestron Connected for managing and controlling the projector and other AV devices.