28
PICTURE menu
Item Description
ACTIVE IRIS
Using the Ÿ/ź cursor buttons changes the active iris control mode.
PRESENTATION
Ù
THEATER
Ù
OFF
PRESENTATION : The active iris displays the best presentation
image for both bright and dark scenes.
THEATER : The active iris displays the best theater image for
both bright and dark scenes.
OFF : The active iris is always open.
• The screen may fl icker when the PRESENTATION or the
THEATER modes are selected. If this occurs select OFF.
MY MEMORY
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the Ÿ/ź cursor buttons and pressing the
Ź cursor (or the ENTER) button performs each function.
SAVE-1
Ù
SAVE-2
Ù
SAVE-3
Ù
SAVE-4
LOAD-4
Ù
LOAD-3
Ù
LOAD-2
Ù
LOAD-1
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may fl icker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using the MY BUTTONs.
Please see the MY BUTTON item in the OPTION menu (
44).
To Next Page
Loading...
