49
SECURITY menu
Item Description
PIN LOCK
The PIN LOCK is a function which prevents the projector from being used
unless a registered Code is input.
1 Turning on the PIN LOCK
1-1 Use the Ÿ/ź cursor buttons on the SECURITY
menu to select PIN LOCK and press the Ź
cursor (or the ENTER) button to display the PIN
LOCK on/off menu.
1-2 Use the Ÿ/ź cursor buttons on the PIN
LOCK on/off menu to select ON and the
Enter PIN Code box will be displayed.
1-3 Input a 4 part PIN code using the
Ÿ/ź/Ż/Źcursor and the COMPUTER (or the
INPUT) button.
The PIN Code again box will appear. Reenter
the same PIN code. This will complete the PIN
code registration.
•
If there is no key input for about 55 seconds
while the Enter PIN Code box or the PIN Code again box is displayed,
the menu will close. If necessary, repeat the process from 1-1.
Afterwards, anytime the projector is restarted after AC power is turned off
the Enter PIN Code box will be displayed. Enter the registered the PIN code.
The projector can be used after entering the registered the PIN code. If an
incorrect PIN code is input, the Enter PIN code box will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn off.
Afterwards the projector will turn off every time an incorrect PIN code is
input. The projector will also turn off if there is no key input for about 5
minutes while the Enter PIN code box is displayed.
This function will activate only when the projector is started after AC power
is turned off.
•
Please do not forget your PIN code.
2 Turning off the PIN LOCK
2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.
2-2 Use the Ÿ/ź cursor buttons to select the OFF and the Enter PIN Code
box will be displayed.
Enter the registered the PIN code to turn the PIN LOCK function off.
If an incorrect the PIN Code is input 3 times, the menu will close.
3 If you have forgotten your PIN Code
3-1 While the Enter PIN Code box is displayed, press and hold the RESET (or
press the Ż cursor and the INPUT buttons at the same time) button for
3 seconds.
The 10 digit Inquiring Code will be displayed.
•
If there is no key input for about 5 minutes
while the Inquiring Code is displayed, the
projector will turn off.
3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will
be sent after your user registration information is confi rmed.
(continued on next page)
To Next Page
Loading...
