-4-
Clo
ed c
linder exhaust
ort or carbon
clogging the muffler
Cleaning
Clogged air cleaner Cleaning
The chain brake is on. Release
Dirt clogging the carburetor high-speed
fuel line
Cleaning
Faulty carburetor pump diaphragm Replacement
Air intake from the gasket portions Inspection
Revolutions too low for idling Adjustment
Revolutions too low for idling Adjustment
Revolutions too low for idling Adjustment
Revolutions too high for idling Adjustment
Worn or faulty clutch Inspection/replacement
High speed unavailable
Revolutions fluctuate
The engine stalls
Starts up, and when idling
mode is set …
Starts rotating
The saw chain starts rotating
during idling.
When the revolutions increase
…
OK
OK
OK
The engine stalls
When speed rapidly
decelerates from high speed…
The engine stalls
When the product is tilted
at idling…
OK
OK
Pulling the throttle lever
increases the speed.
OK