Hitachi CS 40EA Technical Data And Service Manual

-9-
Clogged cylinder exhaust port or
carbon clogging the muffler
Cleaning
Clogged air cleaner Cleaning
The chain brake is on. Release
Dirt clogging the carburetor
high-speed fuel line
Cleaning
Faulty carburetor pump diaphragm Replacement
Air intake from the gasket portions Inspection
Revolutions too low for idling Adjustment
Revolutions too low for idling Adjustment
Revolutions too low for idling Adjustment
Revolutions too high for idling Adjustment
Worn or faulty clutch Inspection/
replacement
High speed unavailable
Pulling the throttle lever
increases the speed.
Revolutions fluctuate
The engine stalls
Starts up, and when idling
mode is set …
Starts rotating
Starts up, and when idling
mode is set …
Starts up, and when idling
mode is set …
Starts up, and when idling
mode is set …
The chain blades start rotating
during idling.
When the revolutions
increase …
OK
OK
OK
The engine stalls
When the speed rapidly
decelerates from high speed…
The engine stalls
When the product is tilted
during idling…
OK
OK

Hitachi CS 40EA Specifications

General

Brand	Hitachi
Model	CS 40EA
Category	Chainsaw
Language	English