Hitachi D10VF - Specifications

English
10
Model D13VF D13VG
Speed of Angle Unit LOW(650/min.) HIGH(1350/min.) LOW(400/min) HIGH(900/min.)
Steel Twist Bit 1/2"(13mm) 1/2"(13mm) 1/2"(13mm) 1/2"(13mm)
Hole Saw 2-1/2"(64mm) 1-1/4"(32mm) 2-3/4"(70mm) 2"(51mm)
Wood Flat Spade Bit 1-1/2"(38mm) 1-1/4"(32mm) 1-1/2"(38mm) 1-1/2"(38mm)
Auger Bit 1-1/2"(38mm) 1-1/8"(29mm) 1-1/2"(38mm) 1-1/4"(32mm)
Self Feed Bit 2-1/4"(57mm) 1-3/4"(44mm) 2-9/16"(65mm) 2-1/8"(54mm)
Hole Saw 4-1/2"(114mm) 2-1/2"(64mm) 4-1/2"(114mm) 4"(102mm)
<Capacity with Angle Unit (Optional acessory for D13VF and D13VG)>
Model D10VF D10VG D13VF D13VG
Motor Single Phase, Series Commutator Motor
Power Source
Single Phase 120V AC 60 Hz
Current 9.0A
No-Load Speed 0-3000/min. 0-1200/min. 0-850/min. 0-600/min.
Drill Chuck Capacity 3/8" (10mm) 1/2" (13mm)
Electric Brake No No Yes Yes
Capacity Steel Twist Bit 3/8"(10mm) 3/8"(10mm) 1/2"(13mm) 1/2"(13mm)
Hole Saw — 1-1/2"(38mm) 2"(51mm) 2-3/4"(70mm)
Wood Flat Spade Bit 1"(25mm) 1-1/4"(32mm) 1-1/2"(38mm) 1-1/2"(38mm)
Auger Bit — — 1-1/4"(32mm) 1-1/2"(38mm)
Self Feed Bit — — 2-1/8"(54mm) 2-9/16"(65mm)
Hole Saw 1-1/8"(29mm) 2-3/4"(70mm) 4"(102mm) 4-1/2"(114mm)
Weight
with Keyed Chuck
4.0 lbs(1.8kg) 4.2 lbs(1.9kg) 4.6 lbs(2.1kg) 4.6 lbs(2.1kg)
(without
with Keyless Chuck
4.0 lbs(1.8kg) 4.2 lbs(1.9kg) 4.4 lbs(2.0kg) —
cord)
SPECIFICATIONS