Hitachi D10VG User Manual

English
1
MODEL DRILL
MODÈLE PERCEUSE
MODELO TALADRO
D 10VF • D 10VG
D 13VF • D 13VG
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET M ODE D’EM PLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil m otorisé peut entraîner
la mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de
ce produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser
l’outil motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs
et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être
conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION M ANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read
and understand this manual BEFORE operating the power tool. Please keep this
manual available for other users and owners before they use the power tool. This
manual should be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde
este m anual para que puedan leerlo otras personas antes de utilizar la herram ienta
eléctrica. Este manual debe ser guardado en un lugar seguro.
D13VF

Hitachi D10VG Specifications

General

Brand	Hitachi
Model	D10VG
Category	Drill
Language	English

Summary

IMPORTANT SAFETY INFORMATION

MEANINGS OF SIGNAL WORDS

Defines the significance of WARNING, CAUTION, and NOTE signals for hazard identification.

SAFETY

GENERAL SAFETY RULES

Provides fundamental safety guidelines for operating power tools, covering work area and personal safety.

Tool Use and Care

Service

Instructions for tool servicing and repairs, emphasizing authorized service centers.

SPECIFIC SAFETY RULES AND SYMBOLS

Safe Tool Handling Practices

Covers safe practices for gripping, moving parts, guards, and tool condition.

Correct Tool Operation and Usage

Ensures proper tool use, application, and handling to prevent accidents.

DOUBLE INSULATION FOR SAFER OPERATION

Double Insulation Precautions

ASSEMBLY AND OPERATION

PRIOR TO OPERATION

Covers essential checks before using the tool: power source, switch, cord, receptacle, and environment.

Mounting and Dismounting the Bit

Instructions for securely attaching and removing drill bits using keyed or keyless chucks.

Attaching the Angle Unit

HOW TO USE

Switch Operation

Drilling Techniques

Provides guidance on drilling speed, pressure, and handling stalls for effective use.

MAINTENANCE AND INSPECTION

Professional Service and Repairs