To Next PageTo Next Page
Need help?Do you have a question about the Hitachi D 10VF and is the answer not in the manual?
Ensure clean, well-lit work areas and avoid damp or wet locations.
Avoid electric shock, keep children away, wear proper clothing, eye protection, maintain balance.
Use right tool, secure work, avoid forcing, disconnect before servicing, check parts.
Maintain tools carefully and have repairs done by qualified personnel.
Details of tool models, voltage, power input, and no load speeds.
Specifications for drill chuck size, capacities, and tool weight.
Drilling capacities when using angle attachments.
Ensure power source compatibility and switch is off before plugging in.
Guidelines for using extension cords and selecting appropriate drill bits.
Instructions for securely mounting and removing drill bits.
Control tool rotation speed and enable continuous running.
Proper pressure application, stall management, and control during drilling.
Inspect bits and mounting screws for wear and tightness.
Protect motor winding and follow service center for carbon brush maintenance.
Power tools are continuously improved; parts may change without notice.
Connect blue wire to N terminal, brown wire to L terminal, avoid earth terminal.
Provides measured noise and vibration levels, recommends ear protection.
General