Need help?Do you have a question about the Hitachi D 10YB and is the answer not in the manual?
General| Chuck Size | 10 mm |
|---|---|
| Voltage | 220-240V |
| Drilling Capacity (Steel) | 10 mm |
| Drilling Capacity (Wood) | 25 mm |
| Cable length | 2.5m |
Detailed descriptions of key selling features like housing, switch, head size, and motor power.
Detailed comparison of product specifications across different models.
Visual comparison of drilling speeds for different models in steel and wood.
Guidelines and general precautions for safe and efficient use of the tool.
Explains safety precautions listed on the tool's name plate for different regions.
Step-by-step instructions for disassembling the angle drill, including chuck, spindle, and power source.
Instructions for reassembling the angle drill, focusing on spindle and power source sections.
Electrical wiring diagrams and internal wire layout for different models with/without noise suppressors.
Details on the type of grease and application points for lubrication of internal parts.
Specified torque values for various screws and bolts used in assembly and repair.
Procedures and values for insulation resistance and dielectric strength tests after repair.
Expected no-load current values under specified voltage and operating conditions.
To Next Page
