Hitachi D 10VH2 - User Manual

DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model
Modèle
Modelo
D 10VH2
Drill
Perceuse
Taladro
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
000BookD10VH2NA.indb1000BookD10VH2NA.indb1 2016/10/0714:49:542016/10/0714:49:54

Summary

Safety Instructions and Instruction Manual

Safety Warning

Warning about death or serious injury from improper or unsafe use of the power tool.

Important Safety Information

General Power Tool Safety Warnings

General safety precautions for operating power tools, covering work area, electrical safety, and personal safety.

Specific Safety Rules and Symbols

Safe Tool Handling and Operation

Double Insulation for Safer Operation

Understanding Double Insulation

Maintaining Double Insulation

Precautions for maintaining double insulation, including authorized service and cleaning methods.

Specifications

Prior to Operation Checks

How to Use

Switch Operation

Drilling Procedure

Steps and tips for effective and safe drilling, including pressure and bit control.

Maintenance and Inspection

Service and Repairs

Guidelines for servicing and repairing the tool, emphasizing authorized centers and genuine parts.

Chemical Exposure Warning

Hitachi D 10VH2 Specifications

General

Power	720 W
Voltage	220-240V
Chuck capacity	1.5 - 13mm
Weight	2.0 kg
Drilling Capacity (Steel)	13mm
Cable length	2.5m
Chuck Size	1.5 - 13 mm (1/16 - 1/2")
No Load Speed	0 - 2, 900/min.
No-load speed	0-2, 900/min