To Next PageTo Next Page
Need help?Do you have a question about the Hitachi D 10VH and is the answer not in the manual?
General safety precautions and warnings for power tool operation.
Explains the meaning of signal words like WARNING and CAUTION.
Guidelines for maintaining a safe and clean work environment.
Precautions for power sources, cords, and grounding.
Operator alertness, attire, and preventing accidental starts.
Guidance on proper operation, handling, and maintenance.
Information on servicing and repairs by authorized centers.
Detailed safety rules covering tool handling, guards, bits, and operation.
Detailed safety rules covering operation, maintenance, and environmental precautions.
Explanation of symbols found on the power tool.
Explanation of double insulation design and precautions for its use.
Introduction to the manual's purpose and general operating notes.
Identifies and illustrates the various components of the tool.
Technical details and specifications of the power tool.
Describes the intended uses of the drill, such as boring holes.
Essential checks and preparations before using the power tool.
Guidance on choosing the correct drill bit for different materials.
Instructions for attaching and removing drill bits for keyed and keyless chucks.
How to check and set the forward/reverse rotation of the drill.
Steps for installing the optional side handle for better control.
Instructions for attaching optional side and top hooks to the drill.
How to operate the trigger switch and speed control for variable speed.
Detailed steps and tips for effective and safe drilling.
Importance of sharp bits and checking screw tightness.
Guidelines for storing the tool and inspecting carbon brushes.
Advice on protecting the motor and emphasizing authorized service.
Lists accessories included with the tool.
Lists additional accessories available for purchase.
General
