Hitachi DV20VB2 - 1/2 Inch Hammer Drill User Manual

Model Hammer Drill
Modèle Perceuse percussion
Modelo Taladro de percusion
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et
propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé
dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should
be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
DV 20VB2

Hitachi DV20VB2 - 1/2 Inch Hammer Drill Specifications

General

Model	DV20VB2
Type	Hammer Drill
Chuck Size	1/2 Inch
Power Source	Corded Electric
Voltage	120V
No Load Speed	0-1, 000/3, 000 RPM
Weight	5.3 lbs
Cord Length	8.2 ft
Additional Features	Variable speed

Summary

IMPORTANT SAFETY INFORMATION

SAFETY

GENERAL SAFETY RULES

Outlines basic precautions for work area, electrical safety, and personal safety.

Electrical Safety

Covers proper use of plugs, avoiding grounded surfaces, and cord care.

Personal Safety

Advises on staying alert, dressing properly, and avoiding accidental starts.

Tool Use and Care

Instructions on securing work, not forcing the tool, and proper maintenance.

Service

SPECIFIC SAFETY RULES AND SYMBOLS

Specific rules regarding tool handling, guards, accessories, and general operation.

DOUBLE INSULATION FOR SAFER OPERATION

ASSEMBLY AND OPERATION

PRIOR TO OPERATION

HOW TO USE

Instructions on operating the switch, controlling speed, and drilling techniques.

MAINTENANCE AND INSPECTION

Inspecting the drill bits

Inspecting the screws

Inspecting the carbon brushes

Maintenance of the motor

Service and repairs