Hitachi DH 40SR - Page 9

--- 6 ---
(1) Anchor size
W1/4" (No. 20)
W5/16" (No. 25)
W3/8" (No. 30)
W1/2" (No. 40)
W5/8" (No. 50)
Code No.
985756
985757
985758
985759
985760
+
+
(1) Anchor adapter (for rotation + hammering)
Anchor size W1/4" (No. 20), W5/16" (No. 25), W3/8" (No. 30),
W1/2" (No. 40), W5/8" (No. 50)
(5) Core bit for efficient drilling
Center pin (C)
Outer diameter (in)
65 mm (9-2/16")
80 mm (3-5/32")
90 mm (3-1/2")
100 mm (3-15/16")
105 mm (4-1/8")
Code No.
903901
Core bit (with guide plate)
Code No.
992819
Core bit shank
Code No.
992814
992815
992816
992817
992818
4. Anchor work for self-drilling anchors (rotation + hammering)
+
+
+
(2) Drift key (Code No. 944574)
5. Anchor work for self-drilling anchors (hammering)
++
(1) Anchor adapter (for hammering)
Anchor size: W3/8" (No. 30), W1/2" (No. 40)
W5/8" (No. 50)
(2) Turning handle (Code No. 944573)
(3) Drift key (Code No. 944574)
(1) Anchor size
W3/8" (No. 30)
W1/2" (No. 40)
W5/8" (No. 50)
Code No.
981929
981930
981931