Hitachi DH24PC - Page 19

18
9. Drilling holes (rotation only)
Chuck adapter (D)
(SDS Plus shank)
Chuck wrench
Drill chuck (13VLA)
8. Drilling holes and driving screws (rotation only)
䡬 Drill chuck, chuck adapter (G), special screw and chuck wrench
Chuck adapter (G)
(SDS-plus shank)
Chuck wrench
Drill chuck (13 VLR)Special screw
Bit No. Screw Size Length
No. 2 3 – 5 mm 25 mm
No. 3 6 – 8 mm 25 mm
11. Dust cup and Dust collector (B)
Optional accessories are subject to change without notice.
Dust cup
Dust collector (B)
䡬 13 mm drill chuck ass’y (includes chuck wrench) and chuck (for drilling in steel or wood).
10. Driving Screws (rotation only)
Chuck adapter (D)
(SDS-plus shank)
Bit No.
12. Hammer grease A
500 g (in a can)
70 g (in a green tube)
30 g (in a green tube)