14
ROTARY HAMMER SAFETY WARNINGS
1. Wear ear protectors.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting
accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
4. Do not touch the bit during or immediately after operation.
The bit becomes very hot during operation and could
cause serious burns.
5. Before starting to break,
chip or drill into a wall, fl oor or
ceiling, thoroughly confi rm that such items as electric
cables or conduits are not buried inside.
6. Always hold the body handle and side handle of the
power tool fi rmly. Otherwise the counterforce produced
may result in inaccurate and even dangerous operation.
7. Wear
a dust mask.
Do not inhale the harmful dusts generated in drilling or
chiseling operation. The dust can endanger the health of
yourself and bystanders.
SPECIFICATIONS
Model DH24PH DH26PC DH28PCY
Voltage (by areas)* (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
Power input* 730 W 830 W 850 W
No-load speed 0 – 1050 /min 0 – 1100 /min
Full-load speed rate 0 – 3950 /min 0 – 4300 /min
Capacity: concrete
steel
wood
3.4 – 24 mm
13 mm
32 mm
3.4 – 26 mm
13 mm
32 mm
3.4 – 28 mm
13 mm
32 mm
Weight (without cord) 2.7 kg 2.8 kg 2.9 kg
* Be sure to
check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Plastic case ...................................................................1
(2) Side handle ...................................................................1
(3) Depth gauge .................................................................1
Standard accessories are subject to change without notice.
000BookDH24PHChS.indb14000BookDH24PHChS.indb14 2013/05/158:39:092013/05/158:39:09
To Next Page
Loading...
