Table 12 Input power specifications
Item Component Specification
Rated power Controller 1,960 V
Input power
1
Controller Single-phase AC
50 Hz/60 Hz
200 V to 240 V
Input current
1,2
Controller 9.8 A
Steady current
3
Controller 4.9 A
Leakage current Controller 1.75 mA
Inrush current Controller 1st (0-p): 30 A
2nd (0-p): 20 A
1st (0-p) time: 25 ms
Power cord plug type Controller IEC60320 C14
Notes:
1. When planning the air-conditioning equipment and power-supply system, use the
multiplied value of [Input Power] × [Input Current].
2. The maximum current of AC input is not a redundant configuration.
3. The maximum current of AC input is a redundant configuration.
Table 13 Input voltage and input frequency requirements
Frequency Input Voltage (AC) Conditions Tolerance (%)
60 Hz ±2 Hz 200 V to 240 V 1 phase
2 wire + ground
+10% or -11%
50 Hz ±3 Hz 200 V to 240 V 1 phase
2 wire + ground
+10% or -11%
60 Hz ±2 Hz 100 V to 120 V 1 phase
2 wire + ground
+10% or -11%
50 Hz ±3 Hz 100 V to 120 V 1 phase
2 wire + ground
+10% or -11%
Electrical specifications
Chapter 3: Specifications
Hitachi Virtual Storage Platform E590 and E790 Hardware Reference Guide 25
To Next Page
Loading...
