Hitachi DKC-F910I-1R9RVM User Manual

Hitachi Virtual Storage Platform E590 and
E790
93-04-01
Hardware Reference Guide
This document provides information about the system hardware components and the mechanical and
environmental specifications for the VSP E590 and VSP E790 storage systems.
MK-97HM85050-01
February 2021

Hitachi DKC-F910I-1R9RVM Specifications

General

Category	Storage
Model	DKC-F910I-1R9RVM
Type	Disk Array
RAID Support	Yes
Hot Swappable	Yes
Power Supply	Redundant

Summary

Chapter 1: Introduction

Key features

Highlights the main capabilities, including performance, reliability, and scalability of the storage system.

Chapter 2: Hardware overview

Controller chassis

Describes the controller chassis and its primary components like boards and power supply.

Controller board

Details the controller board, including its LEDs, switches, and network ports.

Front-end modules

Explains the function and status indicators of front-end modules (FEMs).

10-Gbps iSCSI board LEDs and connectors (optical)

10-Gbps iSCSI board LEDs and connectors (copper)

16-Gbps or 32-Gbps Fibre Channel board LEDs and connectors

LAN blade LEDs and connectors

Chapter 3: Specifications

Environmental specifications

Details temperature, humidity, vibration, and atmosphere requirements for system operation.

Electrical specifications

Covers input power, voltage, frequency requirements, and power cord type.

Physical specifications

Chapter 4: Turning storage system power on and off

Powering on the storage system

Step-by-step instructions for powering on the storage system via the controller chassis.

Powering off the storage system

Procedures for safely powering off the storage system and stopping power supply.