-3-
21-stage clutch
Rotate the clutch dial and line up the numbers “1, 3, 5, ...
21” on the clutch dial (or the black dot) with the triangle
mark on the outer body. Adjust the clutch dial in the weak
or strong torque direction according to the desired torque.
With 10-mm keyless chuck
The keyless chuck faccilitaes the fast and easy
replacement of driver bits. Simply hold the ring with
one hand and then turn the sleeve with the other
hand to replace driver bits.
Slim and soft-grip handle
The handle is covered with a soft elastomer. It is slim, soft, and slip-resistant.
Blow-molded case
The compact blow-molded case is convenient for carrying the tool.
Driver bit
Loosen
Tighten
Sleeve
Ring
Strong
Clutch dial
Triangle mark
Drill mark
Weak
To Next Page
Loading...
