-4-
1. Specifications
Model DS 10DFL
Screw driving
Machine screws ---6 mm (1/4")
Wood screws-------5.8 (dia.) x 45 mm (#12 x 1-25/32")
Capacity
Drilling
Metal -----------------10 mm (3/8”) for mild steel [1.6-mm thick (1/16”)]
12 mm (15/32”) for aluminum [1.6-mm thick (1/16”)]
Wood-----------------21 mm (13/16") [18-mm thick (11/16")]
Keyless chuck
Mount type----------Screw-on (UNIF 3/8” - 24)
Diameter ------------0.8 to 10 mm (1/32” to 3/8”)
Rotation speed Low: 0 to 300 min
–1
, High: 0 to 1,300 min
-1
Torque Slip torque ----------
0.5 to 4.0 N
•
m (5 to 40 kgf
•
cm, 4 to 35 in-lbs.) [21 stages]
Type of motor DC magnet motor
Type of switch
Trigger switch with pushing button for forward and reverse rotation
changeover (with brake)
Enclosure
Body------------------Glass fiber-reinforced polycarbonate resin (black)
and thermoplastic elastomer (green)
Battery ---------------Polycarbonate resin (black)
Charger--------------ABS resin (black)
Type of battery Sealed cylindrical lithium-ion storage battery
Nominal voltage DC 10.8/12 V PEAK
Nominal life Charging/discharging: approximately 1,000 times
Nominal capacity 1.5 Ah
Charging time
Approx. 40 minutes
(with UC 10SFL Charger at ambient temperature of 20°C (68°F))
Battery
(Type
BCL 1015)
Charging
temperature
0°C to 50°C (32°F to 122°F)
Charger
(Model UC 10SFL)
x Overcharge prevention system:
(1) Stop current detection
(2) Battery surface temperature detection (thermostat or thermistor)
x Input capacity: 35 W
x The maximum allowable temperature of the Type BCL 1015 battery is
50°C (122°F).
x Indication method: Pilot lamp to indicate charging state
x Pilot lamp: On------------------- During charging
Off------------------- Charging completed
Net
Main body (including Type BCL 1015 battery) -------- 1.0 kg (2.2 lbs.)
Charger unit (including cord) ------------------------------ 0.35 kg (0.8 lbs.)
Weight
Gross DS 10DFL (2LCSK) (including Type BCL 1015 battery)
Standard accessories
x Charger (UC 10SFL) ------------------------------------------------------------ 1
x Battery (Type BCL 1015) -------------------------------------------------------2
x Phillips driver bit (No. 2) --------------------------------------------------------1
x Battery cover-----------------------------------------------------------------------1
x Case ---------------------------------------------------------------------------------1
SPECIFICATIONS
To Next Page
Loading...
