Hitachi DS 10DFL - Comparison with Similar Products; Specification Comparison

-5-
1. Comparison of Specifications (Superior specifications: )
Maker HITACHI
Model name DS 10DFL
B (EURO) C (EURO)
Steel 10 mm (3/8”) 10 mm (3/8”) 10 mm (3/8”)
Drilling
Wood 21 mm (13/16”) 19 mm (3/4”) 21 mm (13/16”)
Wood
screws
5.8 (dia.) x 45 mm
(#12 x 1 - 25/32”)
Not indicated
5.1 (dia.) x 63 mm
(#11 x 2 - 31/64”)
Max.
capacity
Screw
driving
Machine screws 6 mm (1/4”) 7 mm (9/32”) 6 mm (1/4”)
Low 0 to 300 0 to 400 0 to 350
Rotation speed
( /min
-1
)
High 0 to 1,300 0 to 1,100 0 to 1,300
Max. torque
22 N
•m (224 kgf•cm)
(195 in-lbs.)
30 N•m (305 kgf•cm)
(266 in-lbs.)
24 N•m (245 kgf•cm)
(195 in-lbs.)
Max. torque (hard)
(actually measured values)
27 N•m (275 kgf•cm)
(239 in-lbs.)
34 N•m (346 kgf•cm)
(301 in-lbs.)
27 N•m (275 kgf•cm)
(239 in-lbs.)
[21 stages] [20 stages] [18 stages]
0.5 to 4.0 N•m
5 to 40 kgf•cm Not indicated Not indicated
Slip torque
(4 to 35 in-lbs.)
Chuck type 10-mm keyless chuck 10-mm keyless chuck 10-mm keyless chuck
Spindle lock function None Equipped Equipped
LED light Equipped Equipped Equipped
Soft–grip handle Equipped Equipped Equipped
Battery type Li-ion Li-ion Li-ion
Nominal capacity 1.5 Ah 1.3 Ah 1.3 Ah
Nominal voltage 10.8 V 10.8 V 10.8 V
Battery
Charging time *
1)
40 min. 30 min. 50 min.
Overall length 188 mm (7 - 3/8”) 200 mm (7 - 7/8”) 189 mm (7 - 29/64”)
Overall height 210 mm (8 - 9/32”) 179 mm (7 - 1/16”) 183 mm (7 - 13/64”)
Dimensions
Width 50 mm (1 - 31/32”) 58 mm (2 - 5/16”) 53 mm (2 - 3/32”)
Weight 1.0 kg (2.2 lbs.) 1.1 kg (2.4 lbs.) 1.0 kg (2.2 lbs.)
*1): Charging time may vary depending on the type of charger used.
COMPARISON WITH SIMILAR PRODUCTS