2-14 Installation Guide
2.3. Installing a Hitachi DS7080 Server
D048 DANGER
D048:
The server weighs 160 kg when fully populated.
Important The server is delivered fully populated. It is mandatory to
use a lifting device to install it.
However, it is possible to reduce the server weight by
removing the components from the compute box.
See Appendix Installing a Lightened Server, on page A-1
Required screws, nuts and washers
See Appendix Nuts, Screws and Washers, on page B-1
Required tools
T25 Torx screwdriver
Flat screwdriver
Lifting device
Procedure
1. Prepare the rails
1. Loosen the four screws of each rail.
To Next Page
Loading...
