To Next PageTo Next Page
Need help?Do you have a question about the Hitachi HA820 G3 Series and is the answer not in the manual?
Identifies components on the front of SFF servers.
Details components within the SFF media bay.
Identifies components on the front of LFF servers.
Details components within the LFF media bay.
Describes LEDs and buttons on the SFF front panel.
Describes LEDs and buttons on the LFF front panel.
Explains the function of the UID button for server identification.
Lists power fault codes and affected subsystems.
Explains system conditions based on combined LEDs.
Details LEDs located on the rear of the server.
Describes the functions of system maintenance switches.
Explains how to read DIMM labels for characteristics.
Shows the numbering and layout of DIMM slots.
Identifies heatsink and processor socket parts.
Details LEDs and states for SFF basic drive carriers.
Defines LEDs for the NS204i-u boot device.
Step-by-step guide for server setup.
Specifies clearances for proper server operation and cooling.
Details environmental temperature limits for server operation.
Outlines electrical requirements for server installation.
Instructions for powering on the server.
Procedures for safely powering down the server.
Steps to extend the server for access.
Detailed steps to remove the server from its rack.
Procedure for removing the server's front bezel.
Instructions for installing the server's fan cage assembly.
Steps to remove air baffle or midplane drive cage.
General guidance for installing hardware options.
Importance and methods for backing up server data.
Steps to install a type-o storage controller.
Steps to install a type-p storage controller.
Explains how fan speeds adjust based on temperature.
Instructions for installing high-performance server fans.
Procedure for installing an 8SFF front drive cage.
Steps for installing a 2SFF side-by-side front drive cage.
Procedure for installing a 2SFF stacked front drive cage.
Steps to install a midplane drive cage.
Procedure for installing a rear 2SFF stacked drive cage.
General recommendations for installing and managing hard drives.
Steps to install hot-plug drives.
Lists required firmware for energy pack compatibility.
Procedure for installing energy pack components.
Guide to installing the Systems Insight Display hardware.
Details compatibility between DIMMs and processors.
Procedure for installing a DIMM into the server.
Steps to install an OCP network adapter.
Procedure for installing a PCIe network adapter.
Steps to install a universal media bay in SFF chassis.
Steps to install optical drive in LFF media bay.
Instructions for installing boot device SSDs.
Guide for installing the NS204i boot device.
Safety warnings for power supply installation and handling.
Procedure for installing an AC power supply.
Warnings regarding processor handling and installation.
Detailed steps for installing a server processor.
How to identify correct rack rail components.
Step-by-step guide for mounting the server in a rack.
Details of PCIe5 slot specifications.
Information on compatible PCIe card sizes and types.
Procedure to install expansion cards into PCIe slots.
Steps to install a secondary riser cage.
Steps to install a tertiary riser cage.
Procedure for installing an accelerator or GPU card.
Steps to install a rear 2SFF riser cage.
Steps to install a rear 2LFF riser cage.
Guide for installing primary and secondary risers.
Steps to install tertiary risers.
Procedure for installing the front bezel.
Steps to install the intrusion detection switch.
Advice on safely storing BitLocker recovery keys.
General rules and best practices for server cabling.
Visual guides for connecting various server cables.
How to update server firmware and system ROM.
Methods for configuring server settings.
Guidance for configuring SR and MR storage controllers.
Information on managing the NS204i boot device.
Resources for deploying an operating system.
Steps for implementing server security best practices.
Techniques for optimizing server performance.
Tools and methods for server monitoring.
Guidance for managing HPC clusters.
Explains NMI for crash dump generation.
Details operating and non-operating environmental conditions.
Lists physical dimensions and weight of the server.
Technical details for various server power supplies.
General