Hitachi HA820 G3 Series - Systems Insight Display Combined LED Descriptions

Systems Insight Display combined LED descriptions
14
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. For more information on the combination of these LEDs, see Systems Insight Display combined
LED descriptions.
Systems Insight Display combined LED descriptions
The combined illumination of the following LEDs indicates a system condition:
• Systems Insight Display LEDs
• System power LED
• Health LED
Systems Insight Display
LED and color
Health
LED
System
power LED
Status
Processor (amber)
Red
Amber
One or more of the following
conditions might exist:
• Processor in socket X has failed.
• Processor X is not installed in the
socket.
• Processor X is unsupported.
• ROM detects a failed processor
during POST.
Processor (amber)
Amber
Green
Processor in socket X is in a pre-
failure condition.
DIMM (amber)
Red
Green
One or more DIMMs have failed.
DIMM (amber)
Amber
Green
DIMM in slot X is in a pre-failure
condition.
Over temp (amber)
Amber
Green
The Health Driver has detected a
cautionary temperature level.
Over temp (amber)
Red
Amber
The server has detected a hardware
critical temperature level.
PCI riser (amber)
Red
Green
The PCI riser cage is not seated
properly.
Fan (amber)
Amber
Green
One fan has failed or has been
removed.
Fan (amber)
Red
Green
Two or more fans have failed or been
removed.
Table Continued