7. Connect the cable to the system board.
8. Install the access panel.
9. Install the server in the rack.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server.
The installation is complete.
Memory
Memory population information
For specific memory population information, contact customer support.
DIMM-processor compatibility
Fourth-generation Intel Xeon Scalable processors support DDR5-4800 DIMMs.
Do not mix DIMMs. Install only the supported DDR5-4800 DIMMs in the server.
Installing a DIMM
Prerequisites
Before installing this option, be sure you have the following:
The components included with the hardware option kit
To Next Page
Loading...
