Hardware options installation
About this task
The server supports up to 32 DIMMs.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack.
b. Remove the server from the rack.
4. Remove the access panel.
5. Remove the air baffle.
6. Open the DIMM slot latches.
7. Do one of the following:
• For systems without max-performance heatsinks, install the DIMM.
To Next Page
Loading...
