Hitachi DV 20V - Applications; Prior to Operation; Standard Accessories

English
16
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the accessories listed in the below.
1 Plastic Carrying Case
(Code No. 338762)
1
2
Side Handle
(Code No. 338768)
1
3
Depth Gauge
(Code No. 303709)
1
4
Chuck Wrench
(Code No. 987576)
1
APPLICATIONS
○ By combined actions of ROTATION and IMPACT:
Boring holes in hard materials (concrete, marble, granite, tiles, etc.)
○ By ROTATIONAL action:
Boring holes in metal, wood and plastic.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms to the power requirements specifi ed
on the product nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
which could cause a serious accident.
3. Extension cord
When the work area is removed from the power source, use an extension cord of suffi cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4. Check the receptacle
If the receptacle only loosely accepts the plug, the receptacle must be repaired.
Contact a licensed electrician to make appropriate repairs.
If such a faulty receptacle is used, it may cause overheating, resulting in a serious hazard.
5. Confi rming condition of the environment
Confi rm that the work site is placed under appropriate conditions conforming to prescribed
precautions.
6. Selecting the appropriate drill bit
○ When boring concrete or stone
Use the drill bits specifi ed in the Optional Accessories.
000BookDV20VDChS.indb16000BookDV20VDChS.indb16 2015/06/159:22:552015/06/159:22:55