To Next PageTo Next PageHow to fix no power on Hitachi DVPF2E?
To address the issue of no power in your Hitachi DVD VCR Combo, first, ensure that the power plug is securely connected to an AC outlet. Secondly, verify that the power switch is turned on.
How to fix no sound on Hitachi DVPF2E?
If there is no sound coming from your Hitachi DVD VCR Combo, check that the audio cables are firmly connected. Ensure that the connected audio component is powered on and that both the audio output settings on the DVD VCR Combo and the input settings on the connected audio component are correctly configured. Note that some discs may not play back immediately after a search, which is normal.
Why is my Hitachi DVD VCR Combo remote not working?
If your Hitachi DVD VCR Combo remote control is not responding, please check the following: Ensure the power plug is connected to an AC outlet. Check and, if necessary, replace the batteries in the remote control. Make sure you are aiming the remote control directly at the remote sensor within a 23-foot range, and remove any obstacles between the remote and the sensor. Finally, verify that the correct mode (DVD or VCR) is selected on the remote; if not, press the DVD or VCR button to switch the mode.
What to do if my Hitachi DVPF2E says disc cannot be played?
To resolve a 'Disc cannot be played' error on your Hitachi DVD VCR Combo, try the following: First, ensure a disc is inserted. If a disc is already inserted, check if it's dirty and clean it. Make sure the disc is placed correctly with the label side up. Lastly, if the parental lock is active, cancel it or adjust the control level.
Why is the picture distorted on my Hitachi DVPF2E?
If you're experiencing a distorted picture on your Hitachi DVD VCR Combo, it might be due to copy protection being active. Try connecting the player directly to the TV. Also, slight distortions can occur immediately after using fast forward or reverse, or when a two-layered disc switches layers; these are not malfunctions.
How to get local channels on Hitachi DVPF2E DVD VCR Combo?
If you cannot see on-the-air TV programs on your Hitachi DVD VCR Combo, re-check the connections for both the AERIAL and RF OUT. Also, ensure your TV is correctly set to the TV channel.
Why is there no picture on my Hitachi DVPF2E?
If you're getting no picture on your Hitachi DVD VCR Combo, ensure the video cables are firmly connected. Also, make sure you're using a video disc that is compatible with the player.
What to do if Hitachi DVPF2E DVD VCR Combo won't record?
If you're unable to engage the recording mode on your Hitachi DVD VCR Combo, make sure the erase-prevention tab on the tape is intact. If the tab has been removed, cover the hole with adhesive tape.
Why does my Hitachi DVPF2E DVD VCR Combo video fade when copying?
If you're experiencing video or color fading in and out when copying a video tape with your Hitachi DVD VCR Combo, it may be due to copy protection. You cannot copy a copyrighted video tape, as you are likely encountering copy guard protection.
How to adjust tracking on Hitachi DVD VCR Combo?
To improve a partially noisy playback picture on your Hitachi DVD VCR Combo, adjust the tracking control using the CH Buttons (o/p) for a better picture.
General| Device Type | DVD VCR Combo |
|---|---|
| Brand | Hitachi |
| Model | DVPF2E |
| Video Output | Composite, S-Video, Component |
| Progressive Scan | Yes |
| Remote Control | Yes |
| VCR Type | VCR |
| Playable Media Format | DVD, VHS, CD |
| Recordable Media Format | DVD-R, DVD-RW, VHS |
| Audio Output | Analog Stereo |
