English
19
Fig. 23
Fig. 22
Fig. 21
2. Before starting the engine, check that the AC switch (no-
fuse breaker) of the generator and the power switches of
the appliances are turned off.
3. Connect the plugs of the appliances to the receptacles
before starting the engine.
AC APPLICATION
1. Ground the generator, using the ground terminal located at the side of the panel. (Refer to
“GROUNDING THE GENERATOR”, page 7.)
“I” (ON)
“O” (OFF)
4. Start the engine and check that the voltage meter is
indicating correct voltage.
02_E100_Eng_p18-30.p65 08/5/13, 17:3919
To Next Page
Loading...
