Hitachi G23ST - User Manual

DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model Disc Grinder
Modèle Meuleuse à disque
Modelo Amoladora angular
G18ST
·
G23ST
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool.
This manual should be stored in safe place
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil
motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
G23ST
BookG18STUS.indb1BookG18STUS.indb1 2014/12/1111:41:262014/12/1111:41:26

Summary

SAFETY GUIDELINES

GENERAL POWER TOOL SAFETY WARNINGS

Essential safety precautions applicable to all power tools, covering work area and electrical safety.

OPERATION-SPECIFIC SAFETY

COMMON SAFETY WARNINGS FOR GRINDING;CUTTING-OFF

Safety advice specific to grinding and abrasive cutting-off operations.

KICKBACK HAZARDS

KICKBACK SAFETY PRECAUTIONS

Guidance on preventing and reacting to kickback during tool operation.

GRINDER OPERATION SAFETY

SPECIFIC GRINDING;CUTTING-OFF WARNINGS

Detailed safety rules for grinding and abrasive cutting operations.

CUTTING-OFF OPERATION SAFETY

ADDITIONAL CUTTING-OFF SAFETY ADVICE

GENERAL GRINDER USAGE

GENERAL GRINDER SAFETY INSTRUCTIONS

GRINDER SAFETY RULES

SPECIFIC SAFETY RULES AND SYMBOLS

DOUBLE INSULATION DESIGN

DOUBLE INSULATION FOR SAFER OPERATION

ASSEMBLY AND OPERATION GUIDELINES

PRIOR TO OPERATION CHECKS

GRINDER OPERATION PROCEDURE

GRINDER OPERATION STEPS

Step-by-step instructions for safely operating the disc grinder.

WHEEL MANAGEMENT

DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY

Instructions for mounting and dismounting the depressed center wheel.

TOOL MAINTENANCE AND INSPECTION

MAINTENANCE AND INSPECTION PROCEDURES

Hitachi G23ST Specifications

General

Power	2300 W
Disc Diameter	230 mm
Wheel Diameter	230 mm
No Load Speed	6600 rpm
Spindle Thread	M14