GB
11
1. This unit operates with a AC 6.5V
400mA mains adapter (included).
2. Connecting the unit to any other
power source may cause damage to
the unit. Unwind the mains adapter
to its full length. Connect the mains
adapter to the AC socket on the
rear of the unit and a mains socket.
Make sure the mains adapter is fully
inserted into the mains socket. The unit is now connected and ready to use.
3. To switch the unit o completely, withdraw the mains adapter from the mains socket.
Before use, make sure that the rated voltage of your radio matches your local voltage.
To completely disconnect the unit from the mains power, the mains adapter must be
disconnected from the mains socket. Pease ensure that the mains socket is readily
accessible.
AC ~6.5V 400mA
Power Source
Mains Power
Hitachi KC95E_IB_GB_RC_Final130313.indd 11 14/03/2013 3:39 AM
To Next Page
Loading...
