Hitachi KC95E - Snooze Function; Sleep Timer Setting; Adjusting the Volume

GB
15
When you change the sleep timer from the 10 minutes default setting to a dierent setting,
the new setting will be stored. Whenever you activate the sleep timer it will begin with your
new stored setting and count down to zero from that point.
Remember that the station and volume settings you choose for the Sleep To Music operation
are the same settings you will hear if you set the alarm for wake to radio the following morning.
Snooze Function
Press the SNOOZE button when the alarm sounds. The alarm will go o and will then sound
again in approximately 9 minutes. After pressing the SNOOZE button, the alarm indicator
AL. 1 or AL. 2 will ash to inform you which alarm you have set.
To turn o the alarm, press the ALARM 1 or ALARM 2 button when the alarm sounds. The
alarm function will still be active the next day.
Sleep Timer Setting
This function automatically switches the unit to standby after the preset time has elapsed.
• Press and hold the SLEEP button, at the same time press the SET
buttons repeatedly
to adjust the time digits. Alternatively press and hold the SET buttons to fast forward/
reverse the time minute digits. The sleep timer will be conrmed when you released the
buttons. The time begins to count down from the preset time. (Maximum time span of
sleep timer is up to 90 minutes).
• Press the SNOOZE button to turn o the sleep timer.
Adjusting the Volume
Adjust the sound with the VOLUME control.
Hitachi KC95E_IB_GB_RC_Final130313.indd 15 14/03/2013 3:39 AM