Hitachi KH335BE - Secondary Services; Manual Tuning; Station List

GB
17
1. To activate full scan, press MENU then to select <Full
Scan>, nally press to conrm. The display will show
“Scanning …” and a progressing slide bar.
2. All the stations that have been found will be stored
automatically. To explore and listen to the found stations,
press and then to conrm selection.
Secondary Services
You may see a “>” symbol after the name of the station, this
indicates that there are secondary services available to that
station. These secondary services contain extra services that are
related to the primary station. e.g. a sports station may want to
add extra commentaries. The secondary services are inserted
directly after the primary station in the station list.
To select the secondary station, press when the “<” appears in
the display before the station name. When the secondary service
ends, the unit will automatically switch back to the primary
station.
Manual Tuning
Manual tuning can help add stations that were missed by full
scan.
1. Press MENU and then to select <Manual Tune>. Press
to conrm.
2. Press to scroll through the DAB channels, which are
numbered from 5A to 13F.
3. Press to select the station that you would like to listen to.
Station List
To select from a list of DAB stations, press MENU and then to
select <Station list>. Press to conrm. Press to select the
desired station. Press to conrm.