25
Hints and Tips
Problem Solution
No Sound Adjust the volume.
Static Sound Signal reception is too low. Adjust the aerial
or move the unit to a stronger signal location.
Sound is distorted Volume is too high. Adjust the volume.
Desired station not
found
Weak signal. Search manually.
No DAB coverage
in your area or
poor reception.
Adjust the position of the aerial.
The display is blank This may occur if the broadcaster changes
the label of a service or removes a label while
tuned. The unit will try to re-tune or perform
a scan.
If the unit is not working properly, disconnect the power source and then
reconnect it.
To Next Page
Loading...
