To Next PageTo Next Page
Need help?Do you have a question about the Hitachi LP-TW3001 and is the answer not in the manual?
General| Weight | 3.5 kg |
|---|---|
| Display Technology | 3LCD |
| Projection Size | 30 - 300 inches |
| Brightness | 3000 ANSI lumens |
| Resolution | 1280 x 800 |
| Contrast Ratio | 10000:1 |
| Connectivity | HDMI, VGA, USB |
Identifies and labels all external parts of the projector unit.
Details the buttons and indicators on the projector's control panel.
Identifies and labels all buttons on the remote control.
Lists and describes all input/output ports available on the projector.
Instructions for positioning the projector for optimal use and safety.
Procedures for connecting external devices to the projector.
Steps for safely connecting the projector to a power source.
Instructions for inserting batteries into the remote control.
Steps for installing batteries in the interactive pen.
Step-by-step guide to power on the projector and check status indicators.
Instructions for safely powering down the projector.
Guide to choosing the active input source for the projector.
Procedures for calibrating interactive functions.
Using the auto-adjustment for optimal picture settings.
How to fix image geometric distortion using keystone correction.
Navigating the projector's menu system.
How to adjust the image aspect ratio for different signal types.
Steps to adjust the image size and sharpness.
Calibrating the Interactive Whiteboard function.
Adjusting the image aspect ratio.
Correcting vertical and horizontal image distortion.
Navigating and operating the Interactive Whiteboard menu.
Controlling the overall screen brightness.
Adjusting parameters related to overall picture fidelity.
Adjusting the difference between light and dark areas.
Setting the image aspect ratio for different inputs.
Performing automatic picture alignment and sizing.
Selecting the display resolution for computer inputs.
Adjusting digital zoom for image magnification.
Saving and recalling various projector settings.
Managing power states and network wake-up options.
Correcting geometric distortions of the projected image.
Choosing the audio input port for sound output.
Setting a timer for automatic projector shutdown.
Programming timed power-on/off and event execution.
Restoring all projector settings to default.
Automatic projector startup when a signal is detected.
Information on connecting and operating the projector on a network.
Setting and managing the MyScreen password.
Enabling and managing the PIN lock feature.
Steps to reset a forgotten password.
How to modify the security password.
Introduction to the interactive projection features.
Manually calibrating the interactive function.
Proper handling and use of the interactive pen.
Instructions for installing and using the StarBoard software.
Introduction to presenting without a computer.
Connecting and setting up USB display for Windows.
Performing automatic calibration for the interactive function.
Step-by-step guide to cleaning and replacing the projector's air filter.
Explanations for common on-screen messages.
Interpreting the status of POWER/STATUS1 and STATUS2 indicators.
Restoring all projector settings to factory defaults.
Troubleshooting problems with the interactive pen not working.
Troubleshooting calibration failures and pen misalignment.
Identifying common issues that may not be machine defects.
