EasyManua.ls Logo

Hitachi Projector - User Manual

Hitachi Projector
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENGLISH
Liquid Crystal Projector
USER'S MANUAL
ENGLISH-1
Thank you for purchasing this liquid crystal projector.
Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S
MANUAL” thoroughly to ensure correct usage through understanding. After reading,
store this instruction manual in a safe place for future reference.
CONTENTS
FEATURES....................................P.2
BEFORE USE................................P.2
Contents of Package...........................P.2
Part Names .........................................P.3
Loading the Battery.............................P.5
Fixing the Handle ................................P.5
INSTALLATION.............................P.6
Installation of the projector and Screen
.....P.6
Angle Adjustment................................P.6
Cabling................................................P.7
Power Connection...............................P.8
Example of System Setup...................P.8
Plug & Play..........................................P.8
OPERATIONS................................P.9
Switching the Power Supply ON/OFF
....P.9
Basic Operation.................................P.10
Setup Menu.......................................P.12
Input Menu ........................................P.13
Image Menu ......................................P.14
Options Menu....................................P.15
No Signal Menu.................................P.16
MAINTENANCE...........................P.17
Lamp .................................................P.17
Air Filter Maintenance .......................P.19
Other Maintenance............................P.19
TROUBLESHOOTING.................P.20
OSD Message...................................P.20
Indicators Message...........................P.21
Symptom...........................................P.22
SPECIFICATIONS .......................P.23
WARRANTY AND AFTER-SERVICE
...P.24
Tables:
Table 1. Installation Reference .............P.6
Table 2. Basic Operations...................P.10
Table 3. Setup Menu...........................P.12
Table 4. Input Menu ............................P.13
Table 5. Image Menu ..........................P.14
Table 6. Options Menu........................P.15
Table 7. No Signal Menu.....................P.16
Table 8. OSD Message.......................P.20
Table 9. Indicator Message.................P.21
Table 10. Symptom.............................P.22
Table 11. Specifications......................P.23
For "TECHNICAL" and "REGULATORY
NOTICE", see the end of this manual.
NOTE:
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
TRADEMARK ACKNOWLEDGMENT:
• PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Carefully observe the trademarks and registered trademarks of all companies, even when not
mentioned.

Table of Contents

Other manuals for Hitachi Projector

Preview: Safety Guide
Safety Guide13 pages

Questions and Answers

  • J
    Joshua PearsonAug 16, 2025
    What to do if my Hitachi Projector power is not turned on?
    • M
      Mr. Chris LesterAug 16, 2025
      If your Hitachi Projector isn't powering on, first ensure that the main power switch is turned on. If it still doesn't work, check that the power cord is securely plugged into an AC power outlet.
  • W
    Wendy Morris MDAug 18, 2025
    What to do if my Hitachi says 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME. THE POWER WILL TURN OFF AFTER 0 hr'?
    • W
      Wendy ThomasAug 18, 2025
      If your Hitachi Projector displays 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME. THE POWER WILL TURN OFF AFTER 0 hr,' it indicates that the lamp has reached the end of its life. Immediately switch the power OFF and replace the lamp. Always remember to reset the lamp timer after replacing the lamp.
  • F
    fwilsonAug 21, 2025
    How to fix no video or audio on Hitachi Projector?
    • N
      nguyentravisAug 21, 2025
      If you're experiencing a lack of video or audio on your Hitachi Projector, the first step is to ensure that the input is correctly set using either the projector itself or the remote control. If the issue persists, verify that all signal input connections are correctly connected.
  • B
    Brandon ForbesAug 25, 2025
    What to do if my Hitachi says 'CHECK THE AIR FLOW'?
    • M
      Melissa RomeroAug 25, 2025
      If your Hitachi Projector displays a 'CHECK THE AIR FLOW' message, it indicates that the internal temperature has risen. To resolve this: 1. Switch the power OFF and wait for 20 minutes to allow the equipment to cool down. 2. Check if the ventilation openings are blocked. 3. Ensure the air filter is clean. 4. Verify that the ambient temperature is not exceeding 35°C. After checking these points, switch the power ON again.
  • D
    Dale CoxAug 27, 2025
    Why is there audio but no video on my Hitachi Projector?
    • A
      Amanda CookAug 27, 2025
      If you have audio but no video on your Hitachi Projector, there are a few things to check. First, make sure that the projector is correctly connected. If connections are fine, verify that the brightness adjustment knob is not rotated fully clockwise; adjust it using the MENU button to select BRIGHT and then press the button. Finally, ensure that the slide lens door is open.
  • D
    dbaldwinAug 30, 2025
    What to do if my Hitachi says 'NO INPUT IS DETECTED'?
    • R
      Reginald PerezAug 30, 2025
      If your Hitachi Projector displays 'NO INPUT IS DETECTED,' it means that no input signal is being found. To solve this, check both the signal input connections and the signal sources to ensure they are properly connected and functioning.
  • C
    Christopher MendozaSep 2, 2025
    Why are the images dark on my Hitachi Projector?
    • R
      Ronald SnyderSep 2, 2025
      If the images on your Hitachi Projector appear dark, it might be because the lamp is nearing the end of its service life. Consider replacing it with a new lamp.
  • S
    sonya30Sep 5, 2025
    What does 'SYNC IS OUT OF RANGE' mean on my Hitachi Projector?
    • M
      Matthew AndersonSep 5, 2025
      If your Hitachi Projector displays 'SYNC IS OUT OF RANGE', it means that the horizontal or vertical frequency of the input signal is not within the specified range. Check the specifications of your equipment and the signal source to ensure they are compatible.
  • R
    Renee WaltersSep 8, 2025
    What does 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME. THE POWER WILL TURN OFF AFTER ** hr' mean on Hitachi Projector?
    • J
      John BarnettSep 8, 2025
      If your Hitachi Projector displays 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME. THE POWER WILL TURN OFF AFTER ** hr,' it means the lamp is nearing the end of its life. Replace the lamp and always reset the lamp timer after replacing it.
  • E
    Emily MillerSep 12, 2025
    What does 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME' mean on Hitachi Projector?
    • F
      Felicia WhiteSep 12, 2025
      If your Hitachi Projector displays 'CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME', it means the lamp has been used for more than 1700 hours. Prepare a new lamp for installation and always reset the lamp timer after replacing the lamp.

Summary

Operations

Switching the Power Supply ON;OFF

Instructions for powering the projector on and off, including warm-up and cool-down procedures.

Basic Operation

Covers fundamental controls and functions of the projector via buttons or remote.

Setup Menu

Input Menu

Image Menu

Options Menu

No Signal Menu

Maintenance

Lamp

Information on lamp life, replacement indicators, and safety precautions.

Replacing the Lamp

Step-by-step guide on how to replace the projector lamp.

Resetting the Lamp Timer

Procedure to reset the lamp timer after replacement.

Air Filter Maintenance

Troubleshooting

OSD Message

Explains common on-screen display messages and their solutions.

Indicators Message

Describes meanings of indicator lights and troubleshooting steps.

Symptom

Hitachi Projector Specifications

General IconGeneral
BrandHitachi
ModelProjector
CategoryProjector
LanguageEnglish

Related product manuals