Hitachi PJ-TX200W - User Manual

Questions and Answers

C
catherinejeffersonAug 16, 2025
What to do if my Hitachi PJ-TX200W Projector says 'CHECK THE AIR FLOW'?
- K
  Kevin BuchananAug 17, 2025
  If the Hitachi Projector displays 'CHECK THE AIR FLOW,' it indicates that the internal temperature is high. Turn off the projector and allow it to cool down for at least 20 minutes. Then, check for any blockage of the air passage, ensure the air filter is clean, and verify that the surrounding temperature does not exceed 35°C. If the problem persists, set the FAN SPEED in the SERVICE menu to HIGH.
C
cfreemanAug 19, 2025
What to do if Hitachi Projector displays 'CHECK THE AIR FLOW'?
- C
  craig04Aug 19, 2025
  If your Hitachi Projector displays the message 'CHECK THE AIR FLOW', it indicates that the internal temperature is high. Turn off the power and let the projector cool down for at least 20 minutes. Then, check: * Is the air passage aperture blocked? * Is the air filter dirty? * Does the surrounding temperature exceed 35°C? If the issue persists, set the FAN SPEED in the SERVICE item of the OPTION menu to HIGH.
L
Larry WilkersonAug 22, 2025
What to do if Hitachi Projector shows 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK'?
- N
  Nicholas VaughnAug 22, 2025
  If your Hitachi Projector displays 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK. FILTER MAINTENANCE IS ESSENTIAL TO REMOVE WARNING MESSAGE, RESET FILTER TIMER', immediately turn the power off. Clean or change the air filter. After cleaning or changing the filter, reset the FILTER TIME.
J
Jennifer SnyderAug 26, 2025
What to do if my Hitachi PJ-TX200W Projector says 'FILTER MAINTENANCE IS ESSENTIAL'?
- M
  Mallory WeberAug 26, 2025
  If your Hitachi Projector displays the message 'FILTER MAINTENANCE IS ESSENTIAL TO REMOVE WARNING MESSAGE, RESET FILTER TIMER,' immediately turn the power off. Clean or change the air filter following the instructions provided in “Air filter”. After cleaning or changing the filter, make sure to reset the FILTER TIME.
G
George JacksonAug 28, 2025
What to do if my Hitachi PJ-TX200W Projector says 'No input is detected'?
- M
  Michele BoyerAug 28, 2025
  If your Hitachi Projector displays 'NO INPUT IS DETECTED,' confirm the input signal connection and the status of the signal source.
C
Chloe RiveraAug 31, 2025
Why does my Hitachi PJ-TX200W say 'Sync is out of range'?
- R
  Ronald AllenAug 31, 2025
  If your Hitachi Projector displays 'SYNC IS OUT OF RANGE,' confirm the specifications for both the projector and the signal source.
C
Caroline HancockSep 3, 2025
What to do if Hitachi Projector displays 'SYNC IS OUT OF RANGE'?
- W
  William WeeksSep 3, 2025
  If your Hitachi Projector displays the message 'SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz', please confirm the specifications for both the projector and the signal source.
B
Brittany HallSep 6, 2025
How to fix 'NO INPUT IS DETECTED' on Hitachi Projector?
- M
  Matthew JohnsonSep 6, 2025
  If your Hitachi Projector displays 'NO INPUT IS DETECTED ON ***', confirm the input signal connection and the status of the signal source.
K
kevin73Sep 9, 2025
How to fix 'no input signal' on my Hitachi PJ-TX200W Projector?
- B
  Brandon WilliamsSep 9, 2025
  If your Hitachi Projector displays 'no input signal,' confirm the input signal connection and check the status of the signal source.
P
Patrick StewartSep 12, 2025
What to do if the Hitachi Projector shows that the wavelength of the input signal is out of range?
- C
  Cynthia LopezSep 12, 2025
  If your Hitachi Projector indicates that the horizontal or vertical wavelength of the input signal is out of the response parameter range, confirm the specifications for both the projector and the signal source.

Hitachi PJ-TX200W Specifications

General

Brightness	2000 ANSI Lumens
Native Resolution	1280x720
Contrast Ratio	2500:1
Lamp Life	2000 hours
Weight	2.5 kg
Dimensions	310 x 104 x 245 mm
Technology	LCD
Lamp Type	UHP
Lamp Life (Eco Mode)	3000 hours
Projection Size	30 - 300 inches
Inputs	HDMI, VGA, Composite, S-Video
Resolution	1280 x 720 (HD)