Hitachi PJ-TX200W - Service (Filter Message, Factory Reset)

55
ENGLISH
Advanced Menu (OPTION menu)
Item Description
Continuation of
“SERVICE”
(Continuation of “STRIPE”.)
- NOTE -
• KEYSTONE cannot be adjusted while using the STRIPE .function.
FILTER MESSAGE
Using the ▲/▼ cursor buttons changes the amount of
time til the projector will display the filter message
(“REMINDER…”) (61) that prompts you to clean the air
filter.
50h

100h

200h

300h

TURN OFF
When 50h, 100h, 200h or 300h is selected, the filter message will
appear after the FILTER TIME (
53) has reached the selected
time.
Choosing TURN OFF in the FILTER MESSAGE
menu displays a confirmation dialog. Note that the
filter message will not appear when TURN OFF is
selected.
Pressing the ENTER button selects TURN OFF.
If you want to change the selection, press the RESET button while
the dialog is displayed to return to the FILTER MESSAGE menu.
- NOTE -
• Check and clean the air filter periodically, even if no message is
displayed. If the air filter becomes blocked by dust or other debris,
the internal temperature will rise, which could cause projector
malfunction, or reduce the lifetime of the projector.
• Please be careful of the operating environment of the projector
and the condition of the air filter, especially when the 200h, 300h or
TURN OFF options are selected.
FACTORY RESET
This projector has a FACTORY RESET function to
re-initialize all user settings simultaneously. Except
where the current setting is always considered the
default setting (LANGUAGE, MyScreen Lock,
LAMP TIME, FILTER TIME etc.)
Pressing the ▲ cursor button in the FACTORY
RESET menu performs a FACTORY RESET.
RESET

CANCEL
FILTER MESSAGE
100h
50
h
200h
300h
TURN OFF
ARE YOU SURE YOU WISH TO DISABLE WARNING?
FAILURE TO CLEARN THE FILTER MAY RESULT IN
DAMAGE TO THE PROJECTOR
SEE MANUAL FURTHER INFO
FILTER MESSAGE
:NO :YES
RESET
ENTER
SERVICE
FANSPEED NORMAL
AUTO ADJUST ENABLE
GHOS
T
STRIPE
FILTER MESSAGE 100h
FACTORY RESET EXECUTE
↓
FACTORY RESET
RESET
CANCEL
SERVICE
FANSPEED NORMAL
AUTO ADJUST ENABLE
GHOS
T
STRIPE
FILTER MESSAGE 100h
FACTORY RESET EXECUTE
↓
FACTORY RESET
RESET
CANCEL
SERVICE
FANSPEED NORMAL
AUTO ADJUST ENABLE
GHOST
STRIPE
FILTER MESSAGE 100h
FACTORY RESET EXECUTE
↓
FACTORY RESET
RESET
CANCEL