What to do if the Hitachi PJ-TX100 displays 'CHECK THE AIR FLOW'?
If you're seeing a 'CHECK THE AIR FLOW' message on your Hitachi Projector, immediately turn the power OFF and let the unit cool down for at least 20 minutes. Then, check for any blockage of the air passage, ensure the air filter is clean, and verify that the surrounding temperature is not above 35°C. After confirming these points, you can turn the power back ON.
Why does my Hitachi PJ-TX100 Projector turn off after 2000 hours?
When the lamp usage reaches 2000 hours on your Hitachi Projector, the power will automatically turn off. Replace the lamp. After replacing the lamp, be sure to reset the lamp timer.
What to do if my Hitachi Projector says 'NO INPUT IS DETECTED'?
If your Hitachi Projector displays 'NO INPUT IS DETECTED', confirm the signal input connection and check the status of the signal source.
Guides users on connecting external devices, including safety precautions and Plug-and-Play capability.
Details on safely connecting the projector's power cord to the power outlet.
Step-by-step guide for inserting batteries into the remote control, including safety precautions.
Step-by-step guide for powering on the projector, including indicator lights and initial setup steps.
Detailed instructions for safely powering down the projector, including lamp cooling and power switch operation.
How to choose the input source using projector or remote controls.
Instructions on changing the screen's aspect ratio using the ASPECT button.
Explains how to navigate and use the projector's various menus (PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, EASY).
Explains the PICTURE menu items for Brightness, Contrast, Gamma, and Color Temperature adjustments.
Details settings for COLOR SPACE and COMPONENT port function for various signals.
Explains how to correct Keystone (Vertical) Distortion using the SETUP menu.
Crucial safety information regarding the high-pressure lamp, including risks of breakage, mercury, and proper disposal methods.
Step-by-step guide for replacing the projector lamp, including safety precautions and lamp timer reset.
Instructions for cleaning or replacing the air filter, including filter timer reset and safety warnings.
Explains messages like 'CHANGE THE LAMP' or 'NO INPUT IS DETECTED' and their corresponding solutions.
Addresses messages like 'CHECK THE AIR FLOW' and 'SYNC IS OUT OF RANGE', and filter cleaning.
Interprets the meanings of POWER, LAMP, and TEMP indicator lights and suggests actions for different states.
Addresses issues like 'Power does not come on' or 'No pictures are displayed', identifying non-defect causes.
General| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Economy Mode) |
|---|---|
| Projection Lens | 1.2x manual zoom and focus |
| Resolution | 1024 x 768 |
| Brightness | 2000 ANSI Lumens |
| Weight | 3.6 kg |
| Projection Screen Size | 30 - 300 inches |
| Throw Distance | 1.2 to 12.2 m |
| Input Connectors | Composite, S-Video |
To Next Page
