Preparations
With a computer
• Be sure to tighten the screws on connectors to secure.
• Use only an HDMI cable marked with the HDMI logo for HDMI connections.
• Use a DVI-HDMI cable or adapter when connecting to a DVI output device. In
some cases however, a DVI input to the HDMI port may not work properly.
• Whenever attempting to connect a laptop computer to the projector, be sure
to activate the laptop’s external RGB output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For more information please refer to the
instruction manual of the laptop computer.
• Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a computer.
• Some computers may have multiple screen display modes. Some of these
modes cannot used with this projector.
• The image may not be displayed correctly when the input signal is a
composite sync or a sync on G signal.
• For some computer signals the optional Mac adapter is necessary.
• Automatic adjustment may not function correctly with some input signals.
NOTE
(optional
use)
To Next Page
Loading...
Need help?
General
