3.3 DESCRIPTION OF THE PARTS
o
&RORXU/&'ZLWKWRXFKVFUHHQ
For operation and monitoring of the units through the touchscreen display. It
is operated by using the touch pen (accessory). The touchscreen display will
be automatically turned off when the touchscreen is not operated for a given
length of time.
Gesture controls such as multi touch (simultaneous press of several points
of the screen) or swipe operation are not supported.
Tap 2 places simultaneously
Flick Operation
Front side
Right side
Rear side
When unit body is open
Model: PSC-A32MN
p
7RXFK3HQ
Use the touch pen to operate the touchscreen of the central station
q
2SHUDWLRQ,QGLFDWRU
Indicates the Run/Stop state of the units
OFF: All the units are stopped.
ON (Green): One or more units are in operation.
Flashing (Red): In abnormal condition.
r
3RZHU,QGLFDWRU
Indicates the power state of the central station.
OFF (lamp): Power is turned OFF
ON (lamp): Power is turned ON
s
Hole for attachment of the touch pen holder (accessory).
Attaching holes are located on both sides.
Attach the touch pen holder to one side.
t
TB2
Terminals for connection of the H-LINK control wiring
u
CN1 ~ CN3
Terminals for connection of connector cords (accessory) in case of using
external input/output
v
TB1
Terminals for connection of the power cable
w
3RZHUVZLWFKWRWXUQ2))WKHSRZHUVXSSO\
Use this switch to prevent electrical shock when the case of the unit is
opened.
x
)XVHIRU+/,1.7UDQVPLVVLRQ/LQH
H-LINK Transmission Line (Behind the PCB). For protection of H-LINK
transmission line.
y
DSW2
For terminating resistance. It is used for transmission line recovery.
z
5RWDU\6ZLWFKIRU$GGUHVV6HWWLQJ
For address setting of controller
{
DSW1
For optional function setting
N O T E
5HPRYHWKHSURWHFWLRQVKHHWRQWKH/&'OLTXLGFU\VWDOGLVSOD\EHIRUHXVLQJWKLVSURGXFW
D A N G E R
'2127UHPRYHWKHFRYHUVRISDUWVPDUNHGZLWK³ ´IRUVDIHW\,IWKHVHFRYHUVDUHUHPRYHGFRQWDFWZLWKWKHLQVLGHFRPSRQHQWV
PD\FDXVHDVHULRXVHOHFWULFDOVKRFN
Installation
PMML0332A rev.0 - 05/20154