5.3.3.2 Holiday setting for suspending operation
1 Select “Schedule Settings” at the “Menu” screen.
2 Select “Holiday Setting” at the “Schedule Settings” screen.
(2)
(3)
3 Select the target (all groups, block or group). The calendar for the selection is shown.
The buttons of the groups with holiday setup are shown in blue.
The buttons of the groups with no holiday setup are shown in grey.
N O T E
³+ROLGD\´PHDQVWKDWRSHUDWLRQLVVXVSHQGHGIRUWKHHQWLUHGD\
4 Set the date to suspend the scheduled operation.
Browse the calendar forth and back by tapping “<” or “>”.
By tapping on a date in the calendar, it is set as “Holiday” and marked with “
”. The “Holiday” setting is cancelled by tapping on
the same date again.
Holiday setting is disabled for days before the current day.
The days with holiday setting are marked with “
”.
When “All Groups” or “Block” have been selected, the “
” mark indicates those days when there are groups with holiday settings
mixed with groups with no holiday settings.
5 7DS³6HWWLQJ&RPSOHWHG´WRFRQ¿UPWKHFRQWHQWVRIVHWWLQJVDQGUHWXUQWRWKH³6HOHFW+ROLGD\6HWWLQJJURXS´VHOHFWLRQVFUHHQ
6 Tap “Submenu” at “Holiday setting” selection screen to return to the “Schedule settings” screen.
(4)
Operation
PMML0332A rev.0 - 05/2015
To Next Page
Loading...
